What are the safety precautions needed before extinguishing a fire?

 A fire emergency can put you and your property in danger. Therefore, your priority should be to get out safely before the fire grows too large. An extinguisher can be used to handle small fires. But when an emergency happens, people sometimes panic and fail to take the proper safety precautions before distinguishing a fire. It is essential to remember the following precautions to avoid such situations:  

1.      When you see the room filling with smoke, leave the room as soon as possible, as inhaling too much smoke can put your life at risk.

2.      While the fire is still small, locate the fire extinguisher and remember PASS using the fire extinguisher.

PASS represents:

P - Pull the pin, hold the nozzle towards the fire, and release the lock pin.

A - Aim the extinguisher’s nozzle directly at the base of the fire. 

S - Squeeze the lever slowly and steadily. 

S - Sweep the nozzle side to side.

 

3.      While using the fire extinguisher, make sure to keep the exit open and accessible at your back. So, in case the fire does not calm down, you can promptly escape.

4.      Also, ensure that the fire department has been called and the building is evacuated before the fire grows.

5.      While operating the fire extinguisher, make sure nothing is damaged like the pin or the nozzle. Regular fire extinguisher maintenance from a fire extinguisher service is essential. This way, you won’t face a problem using the fire extinguisher in an emergency.

6.      Make sure to book regular inspections for fire alarm, fire sprinklers, and extinguishers by a licensed professional. Monthly checks will ensure your fire extinguisher maintenance and safety precautions are enforced. A licensed professional will ensure that nothing is damaged, and the fire extinguisher is ready to be used in an emergency.

7.      Make sure to clean the fire extinguisher and shake it before using it as some extinguishers need to be shaken regularly for use.

8.      Ensure to replenish the extinguisher after it has been used; otherwise, it will be useless during the next emergency. 

9.      If the fire extinguisher has not been used in a long time, it could need replacement as sometimes the liquid carbon dioxide can freeze up, and the extinguisher will be useless when that happens.

 

It is best to follow the above tips and pay attention to regular fire extinguisher maintenance by a professional fire extinguisher service. 

 

Tips to Avoid Common mistakes in Fire Sprinkler Installation and maintenance

When you are a homeowner or a business owner, you want to ensure your home and commercial property’s safety. While a sound fire sprinkler installation is a great way to prevent a fire, there are some mistakes that people often make. These common mistakes can put your and your property’s safety at risk in an emergency.

Therefore, it is essential to avoid these mistakes to ensure that you are protected against any fire hazards. Here are some tips that will help you avoid the common mistakes in fire sprinkler installation and maintenance:

 1.         Hiring a reliable installation company  

It is essential to hire reliable fire and safety specialist services for sprinkler installation and maintenance. A good fire safety specialist team will have the required certifications and licensed experts to design a comprehensive system to address all your concerns. 

 

2.                  Regular Fire Sprinkler Inspection 

Sometimes people think that just having sprinklers installed is enough. They forget or neglect to get the fire sprinkler inspection periodically. However, regular fire sprinkler inspection is essential for the maintenance of the fire sprinkler system. Periodic inspections will ensure that your sprinklers will work quickly and effectively when you need them. We recommend getting your sprinklers inspected at least once every month.

 

3.                  Correct Fire Sprinkler Installation 

Another common mistake that can happen is installing the fire sprinklers too close to the ceiling. When fire sprinklers are installed too close to the roof, it may disrupt the sprinkler’s spray pattern. As a result, the sprinkler will not work as required in an emergency. Therefore, you should only hire a reliable company with licensed experts for fire sprinkler installation.

 

4.                  Testing the fire sprinkler system 

It is essential to test how the fire sprinkler system works after the installation. Testing the equipment will ensure that the sprinkler system will respond quickly and efficiently in case of an emergency. A licensed expert usually does testing of your fire sprinkler.  

Following the above tips will help you ensure the operational functionality of your fire safety system. When you hire reliable fire safety services, they will take care of proper installation, maintenance, testing, and regular inspections. So make sure only to hire specialized experts for your fire sprinkler installation. 

Follow these Fire Safety Tips during Electric fires and Keep Everyone Safe.

Winter season is just around the corner. It is that time of the year when we spend more time indoors and keep everyone around us warm and cozy by turning on the electrical appliances. The consumption of electricity during winter months surges and results in electrical fires. These are one of the most destructive and dangerous types of fires. Keep everyone around you safe and hassle-free by getting proper fire extinguisher maintenance in Newark. Follow these tips to combat the electrical fires and keep your friends and family members safe by sharing these tips with them. There is a minute difference between a catastrophic event and a minor one.

 

1. Cut off the electricity: Reach out the cord and try to unplug the appliance safely once you have determined the underlying cause.
2. Use baking soda: You can put out a small fire in your house by putting some Sodium Bicarbonate on it.
3. Put a small blanket: Not many people know that a small electrical fire can be prevented by putting a blanket or eliminating the premises' oxygen source.
4. Try not to put out the fire with water: Water is the natural conductor of electricity. The moment you put water on the electrical fire, you'll get electrocuted or shock. So try not to pour water at the time to extinguish the fire as it might ignite the flammable materials lying in the house.
5. Check your fire extinguishers: Fire extinguishers can be life-savers if you know how to use them properly. Take out some time from your regular schedule and conduct fire-extinguishers maintenance in Newark and give the members the safety drills on the ways to use them properly. 

 

Take the course of action mentioned above the moment you come across a fire event. Faulty electrical equipment must be detected and replaced with new ones. Avoid connecting all the appliances at a single spot. All you need is regular fire extinguishers maintenance in Newark, which have reliable and experienced professionals today. Your loved ones' safety and well-being should be your topmost priority and should not be compromised at any cost. 

 

Common mistakes to avoid when installing a fire alarm system

Fire safety and protection equipment can be really beneficial at extinguishing a fire before it gets out of hands, or at containing it when it has already started to spread. However, if your fire protection system is not installed properly, you cannot rely on it to curb the situation during a fire mishap. It won’t be effective against fire as a properly installed system would. Thus, it is vital to ensure that your fire alarm system and fire suppression system are installed properly and working to their full potential. This is simple to achieve by hiring a professional fire alarm system service in Miami. 

There are many mistakes that people make when it comes to installing a fire alarm system. You must avoid these mistakes to have a properly installed system in your commercial building. 

Here are some of these mistakes. 

 

• Hiring incompetent installation company 

There is no denying the fact that there are tons of companies available out there, claiming to offer high-quality fire alarm system installation services. In fact, the advancement in technology has made setting up a business so easy that any naive contractor can start offering their services just by setting up their website. Even though there are many reliable companies in the market, you can’t overlook the fact that there are many incompetent contractors who have no experience and the resources to perform the job meticulously. A reliable fire safety contractor will have years of experience and an abundance of knowledge about how to properly install the system as per the needs of the space. 

 

• Disregarding safety codes 

If you have done your research about fire safety in a commercial place, you probably know that there are certain fire safety codes to follow. These codes control the style and design of the fire safety equipment directly. From what type of fire alarm system is required to install to the location and accessibility of the equipment, everything is regulated by these codes. Therefore, you cannot disregard OSHA codes and local laws when it comes to designing and installation of the fire safety system. 

 

• Failing to test the equipment after the installation 

Just having the system installed in the commercial property is not enough. You want to make sure that the system is working absolutely fine and can be used in case of a fire emergency. Some property owners often overlook the importance of testing the equipment after getting them installed on the property. Make sure you test them in front of the contractor and fixed or replaced anything that’s not working or causing an obstruction. 

Remember, since fire alarm systems are not used on a regular basis, they start deteriorating with time. Therefore, to ensure they are always in a working condition, fire alarm system inspections in Florida are a must. 

Significance of Fire Extinguisher Maintenance

We try our best to keep everyone around us safe. Despite the best efforts, certain things are beyond our control. One of them is catastrophic fire events, which result in loss of lives and property. These events give traumatic experiences that are difficult to deal with. You are gouging to experience a huge business loss if you do not install a proper fire safety system with fire extinguisher services near you.

Common issues with fire extinguisher systems

Fire extinguishers usually work for several years and, after some time, tend to rust and weaken. There are times when someone tampers with the extinguisher and it becomes of no use, especially when you desperately need it. Therefore, it is important to hire fire extinguishers services such as inspection and maintenance services to ensure fire extinguishers stay in pristine condition always. 

There are times when you have a fire safety system on your premises, but it does not function when you need the most. 

Maintaining fire extinguishers is extremely important. Here are some important reasons to hire fire extinguisher maintenance services.

 

• Saves lives: Employees are entitled to work and feel safe at the office. Their work is their life, and keeping them safe is your responsibility. By conducting fire extinguisher maintenance regularly, you can save precious lives and boost their productivity at work.
• Code compliance: You must get fire extinguishers before a local inspector comes and starts attempting charges of the code violation. Conducting monthly maintenance would save you from the code violations imposed on you.
• Saves money: If you believe that you don't have enough money to maintain these systems frequently, certain fire extinguisher services will come up with hefty discounts. You have to get regular inspections every month. This would save a lot of bucks that can be used for rainy days. It is essential to keep the business safe.

 

A proper fire extinguisher maintenance would save you from the hassles at the later stages. Get them inspected and resolve the existing issues now. The safety of the employees must not be compromised at any cost. Neglecting these things could have detrimental consequences and unbearable losses in the future.

Prevent Major Fire Mishaps by Maintaining the Fire Sprinkler System

A business is established by putting a lot of heat and sweat into it. We expect that the business must run smoothly and give us huge profits. A fire event, one such thing which is often neglected by us, might ruin the entire business if not taken care of properly. As a business owner, it is your responsibility to keep your property and employees safe. Therefore, fire system installation has become the need of an hour. After installation, your sprinkler will perform what is expected out of it. However, just installing the right fire sprinkler system is not enough. There are certain other things that the business owner must do to make the most of fire sprinkler system during emergencies:

Sprinkler System Maintenance

 

• If you are a landlord, try to contact fire sprinkler service providers in case there is a switch of tenants. Ensure that your fire sprinkler system meets the requirements of the new tenants. Sprinkler systems are designed for all sorts of tenants living in the building.
• Get your fire sprinkler system inspected annually by a qualified contractor. This annual process must include inspections and fire sprinkler maintenance including heads, riser pipe, valves, and pump. If your sprinkler has an antifreeze loop or dry valve pipe, get them inspected as well.
• After five years, an internal assessment is conducted on the sprinkler. Such inspections are taken up to ensure that there are no foreign materials in it such as rust, sludge, and rocks. These particles would become a hindrance during the activation of the sprinkler.
• Maintain an 18 inches clearance below the heads of the sprinkler. This would let the water reach out to the fire. Take this step and mitigate the fire event before the arrival of the fire department.

 

Make sure that these steps are followed by you as a business owner. Train your employees on how to use the fire sprinkler systems. Fire events take place due to several reasons. There is a need to get Fire Sprinkler Maintenance properly to prevent lives from getting into danger. By taking these steps, you can focus on other business areas and enhance productivity in the years to come.

 

Ways to Put Out Fire In A Restaurant Kitchen

The kitchen is the heart and soul of the restaurant. A place in which tasty and flavorful food is prepared. One single negligence and it turns the entire restaurant in flames due to fire incidents. Almost 8000 restaurants experience fire accidents that lead to property damage of $240 million. It would be best to take precautionary measures at the initial stages by installing fire sprinkler systems.

What are the common causes of fire accidents?

Educating yourself before the fire event is the best way to prevent the fire accident from spreading or progressing. Following are the causes of fire accidents:

 

1. Electrical: When the appliances are connected to outdated wiring or overloading the kitchen with devices, it results in electrical fires.
2. Flammable liquids: Restaurant kitchens mostly consist of flammable liquids such as animal fat, grease, and oil that immediately catches fire. Fire events that occur due to flammable liquids are hazardous, and it is difficult to put it out.
3. Gas leaks: When the equipment is not connected correctly to the gas line, it causes a gas leak. The gas escapes from the equipment and goes to the air resulting in an explosion.

Ways to Put Out Restaurant Fire

Once the restaurant experiences a fire event, it is essential to control it as soon as possible. You can save millions of people's precious lives by installing fire sprinkler systems at places where they are easily accessible to all. It is vital to maintain and clean the kitchen equipment such as ovens, grills, fryers, and vents. The cost of maintaining such systems is far less than the cost of the restaurant during the fire. The best way to get rid of such situations is by educating your staff. They must identify the hazards at the initial stage and take the necessary steps to get rid of them.

Take these steps to keep everyone safe during a fire event. Get the fire sprinkler frequentlyinspected as they must work properly when we need them the most. Taking stringent steps would help you boost productivity and attract more customers to the restaurant business.

Crucial things to consider before fire alarm installation

Fire alarm systems are the first line of defense against fire accidents. These systems are designed to help notify building occupants about a potential fire breakout. Therefore, it is a must to get fire alarm installation done in commercial buildings. Since not all commercial buildings are the same, it is important to choose the right fire alarm products applicable to your commercial building needs. Moreover, there is no one-size-fits-all when it comes to fire detection and alarm system. There are various different types of alarm systems available on the market and not all of them offer the same range of benefits. 

Before you have a fire alarm system installed in your commercial building, there are certain things that you must consider first. Here are some of them. 

 

• Proper design

If you want to purchase a fire detection and alarm system that is designed according to your building, you need to get in touch with a qualified contractor. According to the National Fire Protection Association, fire alarm maintenance and installation must be performed by only a company or an individual who is experienced and qualified in the installation, maintenance, inspection, and testing of fire alarm systems.

 

• Compliance with relevant legislation and codes 

In the US, many fire safety standards and codes are adopted by the state and local jurisdictions apart from the ones imposed by the federal government. These codes and standards help home and building owners prevent explosion hazards and fire mishaps. Therefore, when you are planning for a fire alarm installation, make sure your products and installation are in compliance with these codes and standards. Remember, fire safety codes often change over a certain period of time. So it’s important to keep your fire alarm systems up to date with these codes. 

 

• The purpose of installation 

It is important to know the purpose of the installation. This is because if you are upgrading your existing system or interlinking your older infrastructure with a technologically-advanced system in another part of the building, it might not work in coordination with the existing system. The newer systems are required to connect with the existing ones. As a result, you might end up getting a totally new infrastructure if the systems are incompatible. 

Installing a fire alarm system may seem like a hassle at first. But if you find a certified and experienced company that can provide quality fire alarm systems as well as installation services, you can rest assured that you will get good services. Also, remember, just getting fire alarm system installed in your building is not enough. You need to get fire alarm maintenance services every now and then to ensure the fire detection and alarm systems are up to date. 

Are you looking for fire alarm maintenance services? Look no further! FireServ is a leading fire safety and prevention service provider that has been in business for decades. We have a team of factory-trained and experienced technicians who strive to provide quality services at competitive rates. Get in touch with us today to know more.

 

Fire Safety Laws that Small Business Owners Must Comply With

As a small business owner, it is your responsibility to provide a safe workplace for your employees. A safe and healthy workplace reduces injury or illness costs and increases productivity and boosts the morale of the employees. Keeping the workplace safe from threats such as fires is the first thing to do to achieve success. And when it comes to installing the right fire protection system in your building, you need to hire reliable fire extinguisher services that can save you from the hassles in the future. 

However, unfortunately, many business owners are not aware of fire and safety laws. Thus, they fail to follow them. Let’s see some of the most important fire safety laws you must comply with.

• Building fire exits: If your building catches fire, try to keep your employees and customers away from the building. The building must have at least two fire extinguishers that are not near each other. You can get these fire extinguishers installed at the door or the window so that it is easy to crawl to that place and use them. Exit routes from the buildings must be free from any obstacles. Finally, the workplace must have exit routes that have lighted exit signs on it.

• Include portable fire extinguishers: Use the fire extinguisher as per the type of hazards taking place. You can have a word with trustworthy and reputed fire extinguisher service and install the extinguishers as per their recommendations. Also, proper training on the use of fire extinguishers must be given to the employees. After the installation process, try to conduct their testing and checking frequently. Make sure that the manufacturer of the fire extinguishers has the inspection checklist before he begins the inspection.

• Plan emergency evacuation: There must be a written emergency exit plan in every office so that the employees know where the exit signs are and the emergency procedures. If your business has physically disabled employees, then the action plan must include the steps to be taken to promptly and safely evacuate those employees. It is essential to organize regular drills so that your employees don't panic when a fire mishap occurs.

Try to follow all these steps to keep yourself and your employees safe at work. Hire fire extinguisher services for installation, regular maintenance, and even inspections to save your business from a huge loss. If you don't follow fire safety practices at work, then you are putting the life of the individuals at risk, and you are liable for it. 

How timely Fire Sprinkler Maintenance can protect your commercial building from damage?

Fire Sprinkler is the most effective equipment for the protection of life and property from the fire breakouts. With the right safety measures and compliance, damage to the commercial building can be prevented. Therefore, it is necessary for every commercial building to have a sprinkler system installed to ensure the safety of its occupants and assets from fire. 

However, most people are only concerned about the installation of fire sprinklers. Along with the installation, fire sprinkler maintenance needs to be done to make sure that it must work properly during an emergency. It should be done by the team of trained professionals who carries out timely inspection and reporting, periodic testing of all the components, repair, and replacement of parts if required. 

The decision to install a fire sprinkler system needs to be taken after significant research, preparation, and proper planning. How well the fire sprinkler system has been operated and how long they last depend largely on the hiring of the reliable fire sprinkler company for their complete process from installation to the fire sprinkler maintenance. 

Some tips that can be taken into consideration while choosing a fire sprinkler company for fire sprinkler maintenance

Licensed: It is important that fire protection or fire sprinkler company that you choose holds the proper licensing. They must meet statutory compliance and safety standards as per the NYC fire code. 

You can check whether they are licensed with the local authorities for the work they perform. Most often, these licenses have been issued by the state’s fire marshal or by the contractor licensing authority. Moreover, you can visit the secretary of state’s website to check if the company is registered or not and for how long they are into this. 

Complete Service: Make sure that the fire sprinkler company can help you with the entire services of the sprinkler system. They must perform the complete process of installation, maintenance, testing, and violation removals. Expert professionals will be transparent in telling you about the number of services they offer and about the complete cost of the installed fire sprinkler services. 

Trust Factor: You need to hire a professional company that knows all the codes. If you are looking for Fire Sprinkler Services, make sure to read the contract of an inspection and testing agreement properly so that you know what services are covered.

Read carefully all the terms and conditions so that everything should be included and there should not be any hidden cost that would eventually have to pay. 

In Closing

Fire Sprinkler Maintenance depends on the type of system installed in your building. All sprinkler systems need visual inspections but some system requires additional monthly, quarterly, or semiannual maintenance. So, you should choose a professional company very carefully that meets all the requirements set by the New York City Fire Code and standards. 

4 Tips to keep your fire sprinkler system working properly

A well-installed and maintained fire sprinkler system can not only protect your building from fire mishaps but also prohibit a fire from turning into a raging inferno. This means keeping your fire protection system working properly can bring a huge difference between substantial losses and a more manageable situation.   

A fire sprinkler system is designed to prevent catastrophic fire emergencies. Thus, it is important to ensure that they are always in a pristine working condition. Many property owners think getting a fire sprinkler system installed on their property is enough. But that’s where the problem begins. Besides having a well-installed system on your property, regular fire sprinkler maintenance and inspection are underlying virtues to success. 

Fire safety is a serious business. Get it wrong - and experience devasting damages. To protect your property and its occupants safe and sound, you need to pay more attention to your fire protection system. In this blog, let’s see how you can make the most of your fire sprinkler system. 

Here are certain tips to keep your fire sprinkler system working properly. 

• Schedule regular maintenance 

Maintenance is extremely crucial to the proper working of your system. Scheduling regular maintenance not only ensures that the fire sprinkler system won’t ditch you in an emergency but also prevents hefty penalties of not following fire safety standard laws. 

• Don’t forget about fire sprinkler inspection 

Fire sprinkler systems are the standard building code necessity. As per the National Fire Protection Agency (NFPA), every property owner needs to hire fire sprinkler inspection services regularly. A licensed inspector should visit your property and thoroughly inspect the sprinkler system to ensure it’s in compliance with the state laws and in a proper working condition. 

• Don’t block the fire sprinkler

Even though sprinkler systems are extremely powerful equipment in protecting fire mishaps, they are sensitive to blockages. To ensure your sprinkler systems are always in a working condition, make sure you do not paint over your sprinkler heads or block with decorative items of furniture. If their heads are blocked by anything, they may not be able to detect smoke and get activated in an emergency. 

• Always keep the control valves open 

Control valves are important components of your fire sprinkler system. It’s crucial that you keep the control valves open always. They are responsible for controlling the water flow. If they are not opened properly, the water may not flow properly to the sprinklers and they will fail to perform when you need them the most.

Apart from these tips, there are some other things to keep in mind such as staff training, and conducting fire drills every now and then. Remember, don’t take fire sprinkler inspection services for granted. They can save lives and property damage. 

What needs to be done to pass fire extinguisher inspections?

Fire extinguishers can save lives if they are well-maintained and work properly during an emergency. This is why regular fire extinguisher inspections are done to ensure fire extinguishers installed in your commercial building are always ready to use. 

Fire safety should be the top-most priority for any property owner. Taking anything for granted, including a faulty fire extinguisher, can result in grave consequences during a fire breakout or hefty penalties if you fail inspections. 

Having fire safety measures in place is not enough. You want to run regular fire extinguisher testing to ensure your fire protection systems pass the inspection and save you from paying costly fines. 

How often should you run fire extinguisher testing?

It’s quite common to forget about fire extinguishers after their installation. They are always there in your building to help you extinguish any type of fire “just in case”. But we all spend our days hoping we never have to use them.

Although fire extinguishers are not always on top of mind, there can be nothing more dangerous than needing an extinguisher in an emergency and finding out that it does not work. Therefore, many inspection officers recommend running fire extinguisher inspections at least once a month. It can be a visual inspection, maintenance inspection, or internal maintenance inspection (required every 4-5 years).

Let’s see what you can do to ensure that you pass fire extinguisher inspections. 

• Preparing for fire extinguisher inspection 

When it comes to fire extinguisher inspections, there are certain things that a fire safety inspector looks for when performing his job. Some of the things that may be inspected by a fire safety inspector include

·         Your fire extinguishers compliance with the NFPA 10

·         Whether or not they are easily accessible by the occupants of the building 

·         Do the occupants of the building know where they are mounted and how to use them?

·         Are all the fire extinguishers charged completely?

·         Are the nozzles on the extinguishers in working condition?

What should you prepare before the inspection?

To ensure you pass fire extinguisher inspections, make sure you perform some portable fire extinguisher testing to check whether they are working or not. Also, run a visual inspection and check if all the fire extinguishers are labeled properly. Violation of this code may result in costly fines. 

Conclusion 

Inspections are done to ensure that the fire extinguishers installed in the building are in pristine working condition. It is important to keep these fire protection systems up to code. After all, their performance is crucial to the safety of yourself, your employees, and your assets.