A Guide To Use A Fire Extinguisher

Fire extinguishers are a device that a property owner must install on the property. It is a protective measure that the property owners must take for enhanced safety of the people. Fire extinguishers can be installed on both residential as well as commercial properties.

Just installing fire extinguishers is not enough, you should also know how to properly use a fire extinguisher. Also, it is important to keep the extinguishers in good condition and properly maintained. This can be done by conducting fire extinguisher inspections.

Fire mishaps are uncertain. The best way of dealing with these fire mishaps is to install fire extinguishers in the property. Also, keep in mind that it is essential to conduct fire extinguisher testing for enhanced protection and taking proactive action during a sudden fire accident.

Below mentioned are the steps for using a fire extinguisher.

1. FIre classification: It is essential to know what type of fire you are dealing with. Fires can be classified under the categories A, B, C, D, and K. The type of fire depends on the source of fire. In order to use the fire extinguisher, it is crucial to know the type of fire. Only then will you be able to understand the type of fire extinguisher to use that will put off the fire.

2. Select the right type of fire extinguisher: After you have ascertained the type of fire, check if the fire extinguisher is compliant with the fire type. Fire extinguishers come with labels. Check the labels and then choose the extinguisher as per the industry that you’re working in. This is a great way of taking precautions and avoiding damage when the mishaps occur.

3. Make use of the PASS method: Once you have determined what type of fire might occur depending on the industry type and choosing the right type of fire extinguisher, it is essential to know the right technique of using the device. In case of a fire emergency, it is recommended to use the PASS method. Which is:

• P- Pull the pin
• A- Aim the nozzle
• S- Squeeze the handle
• S- Sweep from side to side

4. Know when to evacuate: When you’ve taken the effort and the fire is going out of control, make sure that you evacuate the place for your own safety. This should be done in situations where the fire is spreading too quickly.

Make sure that you conduct proper fire extinguisher inspection and keep the extinguishers in good condition. This proactive approach will help you in taking steps to actively combat when a fire mishap occurs.